%FILENAME%
klipper-0.13.0-1.1-x86_64_v4.pkg.tar.zst

%NAME%
klipper

%BASE%
klipper

%VERSION%
0.13.0-1.1

%DESC%
3D printer firmware with motion planning on the host

%CSIZE%
6911803

%ISIZE%
223112570

%SHA256SUM%
ee3b00a8d8c7768387ca4df6565d8a05a1c9fc78ab4f4f221ab269ed45d6b023

%URL%
https://www.klipper3d.org/

%LICENSE%
GPL3

%ARCH%
x86_64_v4

%BUILDDATE%
1753480143

%PACKAGER%
CachyOS <admin@cachyos.org>

%DEPENDS%
python-can
python-cffi
python-greenlet
python-jinja
python-markupsafe
python-pyserial
libusb

%OPTDEPENDS%
ncurses: for choosing compilation config
avrdude: for flashing firmware on AVR MCU
stm32flash: for flashing firmware on STM32 MCUs
avr-gcc: for AVR MCU firmware compilation
avr-binutils: for AVR MCU firmware compilation
avr-libc: for AVR MCU firmware compilation
python-numpy: for resonance measurement
python-matplotlib: for resonance measurement
dfu-util: for flashing firmware on STM32 MCUs
arm-none-eabi-gcc: for RPi firmware compilation
arm-none-eabi-newlib: for RPi firmware compilation

%MAKEDEPENDS%
git

