%FILENAME%
klipper-0.12.0-3.1-x86_64.pkg.tar.zst

%NAME%
klipper

%BASE%
klipper

%VERSION%
0.12.0-3.1

%DESC%
3D printer firmware with motion planning on the host

%CSIZE%
6474485

%ISIZE%
214219480

%SHA256SUM%
56407b637852a85fb3f3c5caa31cd53b170341925d208153e651d29952fc7e3c

%URL%
https://www.klipper3d.org/

%LICENSE%
GPL3

%ARCH%
x86_64

%BUILDDATE%
1714282192

%PACKAGER%
CachyOS <admin@cachyos.org>

%DEPENDS%
python-can
python-cffi
python-greenlet
python-jinja
python-markupsafe
python-pyserial
libusb

%OPTDEPENDS%
ncurses: for choosing compilation config
avrdude: for flashing firmware on AVR MCU
stm32flash: for flashing firmware on STM32 MCUs
avr-gcc: for AVR MCU firmware compilation
avr-binutils: for AVR MCU firmware compilation
avr-libc: for AVR MCU firmware compilation
python-numpy: for resonance measurement
python-matplotlib: for resonance measurement
dfu-util: for flashing firmware on STM32 MCUs
arm-none-eabi-gcc: for RPi firmware compilation
arm-none-eabi-newlib: for RPi firmware compilation

%MAKEDEPENDS%
git

